News Update
- Coming Soon!
EDSYN
Back To ProductsTSX70
SMT Reflow Vacuum Workstation
The world's most practical workstation, user friendly and effective in site preparation for BGA's , PLCC's, QFP's and other fine pitch devices.
- Nitrogen can be used to reduce oxidation and bridging
- Dual controls for hot gas and tip temperatures to produce even heating of board
- Use for site preparation and reinstallation of QFP's
- Recommended and utilized by major manufacturers and subcontractors in high volume BGA programs.
Specifications for Model TSX70
- Power Requirements: 120V, 60HZ
- Power Rating: 39W - 330W
- Heater Rating: 24V, 45W and 24V, 70W
- Temperature Range: 400°F-800°F/205°C-427°C
- Temperature Regulation: ±6°F/±3°C
- Tip-to-Ground Voltage Leakage/Resistance: < 2mV / < 2 ohms
- Overall Dimension: 5.8"W x 10.94"H x 8.8"D
147mm x 254mm x 224mm - Weight
Power Supply: TSX70-2 6.2 lbs / 2.8kg
Desoldering Hand Tool: TSX70-1 13.5 oz /383g
FXF11 / FXF12
ATMOSCOPE FUMINATOR
Bench Top Fume Extractor Fans
A compact high efficiency two-stage charcoal impregnated filtration system hat delivers optimum filtering capability at the fume source.
- Powerful 12V fan motor draws fume away from operator
- Ultra-quiet operation
- FXF10 model features only the fan assembly. Stand and base are not included.
- Bright front (green) and rear (yellow) LED's to indicate power and air flow direction.
- Adjustable to almost any working angle.
- Quick filter replacement.
- Internal Safety Grills
- Low Static, ESD-Safe
| Specifications for Model FXF11/FXF12/FXF10 | |
| Power Requirement 12VDC | |
| Overall Dimension | |
| FXF11 | 10 - 40°C |
| FXF12 | 5.5"94W x 12"94H x 5.5"94D 140mm x 305mm x 140mm |
| FXF10 | 5.5"94W x 12"94H x 7"94D 140mm x 305mm x 178mm |
| Weight | |
| FXF11 | 1.09 lbs/.49kg |
| FXF12 | 1.28 lbs/.58kg |
| FXF10 | 7 oz / 199g |
| Contents | |
| FXF10 | ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with XF02 Primary Rotating and XF03 Charcoal Impregnated Filters. Complete Fan Assembly with Filters, 7 oz / 199g |
| SR538 | 12VDC Wall Transformer |
| SR542 | Stand for the FXF11 with Solder Peg |
| SR541 | Stand for the FXF12 with solder Peg |
| SH232 | Sponge Holder |
| XF01 | Filter Set one each XF02 and XF03 |
| XF02 | Primary Rotating Filter (set of 5) |
| XF03 | Charcoal Impregnated Stationery Filter (set of 5) |
FuminatorTM FX300 Entry Level Volume Fume Extractor
Entry Level Volume Fume Extractor
FX300 Features
- Quiet Operation
- Small Footprint - 17" (H) x 13" (W) x 12: (D)
- (430mm(H) x 330mm(W) x 300mm(D))
- Portable - 33 lbs
- Easy Filter Change
- Quick and Easy Set Up
- Cost Effective
- Outstanding Value
- High Efficiency (HEPA) and Gas Filters Available
- Factory Warranty for up to 3 Years
VA175
Air and vacuum Pick-Up System
Air revolutionary pick and place system that uses direct air pressure or vacuum to pick-up components.
- Requires clean and dry shop air, 60-90 psi
- ESD-safe
- Quiet Operation
- Ultra-lightweight tool
- Equipped with vacuum release value
- Easy adjustment knob for vacuum or air pressure
- Use as a blower for cleaning or cooling hot components
- Variety of suction cup sizes available
- Uses high flow suction to pick-up small parts
- Lift and cool down components by using positive air pressure
LP200
SOLDAVAC Lifter by Pen Vac Portable Vacuum Pick-Up Tool
DS017 Deluxe Soldapullt
Deluxe desoldering tool
- "The Original" 94 Deluxe desoldering tool
- Designed for heavy duty, high volume applications
- High efficiency, durable construction
- Retractable shaft guide for portability and easy storage
PT109/PT209/PT309 Soldapullt
Lightweight, petite barrel for smaller hands
- Lightweight, petite barrel for smaller hands
- PT209 is micro-tip model
- PT309 has 2"94 longer reach for desoldering components located in deep areas
US140/US240
Delivers powerful vacuum impulse
- Delivers powerful vacuum impulse
- Single-handed loading system
- Adjustable loading stroke to reduce hand strain
- US240 is a micro-tip model
SS750 Standard Metric Challenger Soldapullt
for desoldering basic electronic components
- High quality, low cost
- Designed for desoldering basic electronic components
- Ideal for hobbyist
- Easy to maintain
AS196 SILVERSTAT Soldapullt
Designed for heavy duty, high volume applications
- Static safe conductive plating
- Designed for heavy duty, high volume applications
- High efficiency, durable construction
- Retractable shaft guide for portability and easy storage
DS017LS Low Static Deluxe
Retractable shaft guide for portability and easy storage
- Molded from conductive material
- High efficiency and durable construction
- Retractable shaft guide for portability and easy storage
US340 Low Static Universal Soldapullt
Single-handed loading system
- Powerful vacuum
- Low static barrel
- Single-handed loading system
- Adjustable loading stroke to reduce hand strain
SS350/SS750LS Standard Metric Low Static Challenger Soldapullt
has aluminum barrel for easy cleaning
- High quality, low cost
- Both SS350 and SS750LS are designed for single-handed operation
- The SS350 has aluminum barrel for easy cleaning
