The Personnel Grounding Tester PGT120 is a wrist strap and footwear tester for access control of ESD protected areas (EPA’s)

• The test result is indicated with audible and visual signals. A relay with a dry contact provides
• the connection to a door opening system
• Wrist strap, right and left shoe testing is simultaneously possible by separate measuring circuits
• In combination with a barrier gate, the footwear measurement can be performed in series without pressing a button (hands-free mode).
• Separate measurement of left and right shoe
• Lower limit disabling possible
• The unit can be used on bench tops or as a wall mounted unit (Wall mounting requires an additional wall mounting plate)

Test voltage: 100 V (switchable to 30 V, 50 V)
Test range: 750 kohm … 35 Mohm, wrist strap / coil cord 100 kohm … 35 Mohm (swithchable to 100 kohm …. 70 Mohm), footwear (limit is valid for each single shoe) 200 kohm …..140 Mohm for “hands-free mode” (footwear measured in series)
Operation:Battery operated (9 V), external power supply 230 VAC
Signal: Audible and visible
Output: Relay output for Door opener with dry contact Shoe testing electrode: 350 x 500 x 8 mm

Includes:
PGT 120 unit, footwear testing electrode, user’s manual in English and German, Calibration Certificate, 9 volt battery and 230 VAC power supply

Part Nr.
7100.PGT120 Personnel Grounding Tester PGT120 7100.PGT100.101 Wall mounting plate for PGT120 and PGT100 (not shown) 7100.PGT120.CU Calibration unit for PGT120

When the PGT120 is operated in the “hands-free mode”, the measurement is performed in series through the shoes without touching the contact electrode on the PGT120 unit

Calibration Unit for PGT120 Footwear electrode for separate shoe testing